← Back to Main Hub
7 min read • Technical Article

Holland Fabric Specifications: GSM, Pile Height, Martindale & Backing Types

Complete architectural spec sheet: evaluating 50D/75D DTY micro-polyester, pile height calibration, TC vs fleece bonding, and abrasion tests.

Holland Fabric Specifications: GSM, Pile Height, Martindale & Backing Types

In modern furniture architecture and commercial textile engineering, selecting the appropriate textile substrate is vital. This guide delivers verified data from Emm Emm Velvet’s Panipat laboratory, highlighting mechanical performance, tensile resilience, and structural lifespan.

1. Key Engineering Parameters

Our ISO-certified laboratory assessments focus on three primary durability factors:

  • Martindale Abrasion Endurance: Evaluated under 12 kPa pressure to simulate decades of seated friction.
  • Composite Backing Integrity: Preventing seam rupture, fraying, and tensile delamination under tension.
  • Hydrophobic Surface Coating: Repelling water-based spills before liquid penetrates inner foam cores.

Architect's Takeaway

Always verify roll GSM and backing bond strength prior to cutting. Specifying 400+ GSM ensures long-term seam stability across high-traffic residential suites.

2. Recommended Maintenance & Care

To retain original pile density, vacuum weekly with a soft bristle attachment. For water spills, immediately blot with an absorbent microfiber towel. Never iron directly on high-pile velvet; use low-pressure indirect steaming held 4 inches away to release pile pressure marks.

Request a Physical Swatch Book

Receive tactile shade cards and laboratory test certificates delivered directly to your workshop.

WhatsApp Sample Desk